Clear Filters | 621 - 640 of 2802 results

2 LRS vehicle maintenance Airmen keep Barksdale moving

Staff Sgt. Cody Steward, 2nd Logistics Readiness Squadron vehicle maintenance technician, looks over a heating, ventilation, and air conditioning module for defects on Barksdale Air Force Base, La., Dec. 10, 2013. The vehicle maintenance Airmen are trained to repair more than 20 different types of vehicles including fire trucks, refueling trucks, every day-use vehicles, ambulances, buses and maintenance trucks used to tow aerospace ground equipment. (U.S. Air Force photo/Senior Airman Kristin High)
Details Download

2 LRS vehicle maintenance Airmen keep Barksdale moving

Staff Sgt. Cody Steward, 2nd Logistics Readiness Squadron vehicle maintenance technician, inspects a duct to a heating, ventilation, and air conditioning module in a truck on Barksdale Air Force Base, La., Dec. 10, 2013. Once the discrepancy is found, Steward will correct it to ensure the AC and heat are properly functioning. (U.S. Air Force photo/Senior Airman Kristin High)
Details Download

2 LRS vehicle maintenance Airmen keep Barksdale moving

Senior Airman Jon Moore, 2nd Logistics Readiness Squadron vehicle maintenance technician, troubleshoots codes in a multi-stop van on Barksdale Air Force Base, La., Dec. 9, 2013. The multi-stop vehicles are used to transport cargo, personnel and tools to maintenance Airmen on the flightline. (U.S. Air Force photo/Senior Airman Kristin High)
Details Download

2 LRS vehicle maintenance Airmen keep Barksdale moving

A fleet of vehicles wait for inspection and repair in the 2nd Logistics Readiness Squadron vehicle maintenance shop on Barksdale Air Force Base, La., Dec. 9, 2013. The vehicle maintenance flights responsibilities include maintaining Barksdale's motor pool and ensuring all vehicles that come in, leave in top condition. (U.S. Air Force photo/Senior Airman Kristin High)
Details Download

2 LRS vehicle maintenance Airmen keep Barksdale moving

Staff Sgt. Jonathan Graham (left) and Senior Airman Kevin Richberg-Brown, 2nd Logistics Readiness Squadron vehicle maintenance technicians, inspect an anti-lock brake system on Barksdale Air Force Base, La., Dec. 9, 2013. The inspection was conducted during a preventative maintenance check to ensure proper function. (U.S. Air Force photo/Senior Airman Kristin High)
Details Download

2 LRS vehicle maintenance Airmen keep Barksdale moving

Airman 1st Class Cody Akers, 2nd Logistics Readiness Squadron vehicle maintenance technician, tightens a castle nut on the wheel of a fork lift on Barksdale Air Force Base, La., Dec. 9, 2013. The vehicle maintenance section maintains a wide range of vehicles to include fire trucks, refueling trucks, every day-use vehicles, ambulances, buses and maintenance trucks used to tow aerospace ground equipment. (U.S. Air Force photo/Senior Airman Kristin High)
Details Download

307th AGE Airmen repair fuel sending unit

Airman 1st Class Toni Petty, 307th Aerospace Ground Equipment journeyman, mounts a gas line on a self-generating nitrogen cart on Barksdale Air Force Base, La., Dec. 3, 2013. Petty removed the gas line to perform maintenance on the fuel tank and determine why the fuel gauge wasn't reading properly. (U.S. Air Force photo/Senior Airman Joseph A. Pagán Jr.)
Details Download

307th AGE Airmen repair fuel sending unit

Airman 1st Class Toni Petty, 307th Aerospace Ground Equipment journeyman, mounts a gas line on a self-generating nitrogen cart on Barksdale Air Force Base, La., Dec. 3, 2013. A SGNC is used to turn air into nitrogen so it can be used to fill the tires on a B-52H Stratofortress. Air pressure in a tire changes with the weather, and nitrogen helps sustain the correct pounds per square inch. (U.S. Air Force photo/Senior Airman Joseph A. Pagán Jr.)
Details Download

307th AGE Airmen repair fuel sending unit

Airman 1st Class Toni Petty, 307th Aerospace Ground Equipment journeyman, turns on a self-generating nitrogen cart on Barksdale Air Force Base, La., Dec. 3, 2013. Petty fixed a leak on a float inside the fuel tank of the SGNC. The float was filled with fuel, sinking it to the bottom of the tank, which kept the fuel gauge at empty. (U.S. Air Force photo/Senior Airman Joseph A. Pagán Jr.)
Details Download

307th AGE Airmen repair fuel sending unit

A fuel sending unit and float rest on a self-generating nitrogen cart at Barksdale Air Force Base, La., Dec. 3, 2013. The float moves up and down when the fuel levels change, sending a signal to the fuel gauge signifying the level of fuel in the tank. (U.S. Air Force photo/Senior Airman Joseph A. Pagán Jr.)
Details Download

307th AGE Airmen repair fuel sending unit

Tech. Sgt. Jacob Delloroso, left, 307th Aerospace Ground Equipment craftsman, and Airman 1st Class Toni Petty, 307th AGE journeyman, use a jack to lift a fuel tank on Barksdale Air Force Base, La., Dec. 3, 2013. Delloroso and Petty removed and replaced the fuel sending unit on a self-generating nitrogen cart. The fuel sending unit sends a signal to the fuel gauge showing the fuel levels for the SGNC. (U.S. Air Force photo/Senior Airman Joseph A. Pagán Jr.)
Details Download

Airmen participate in ATSO scenario

An emergency Management Support Team member utilizes a Joint Chemical Agent Detector during an Ability to Survive and Operate scenario on Barksdale Air Force Base, La., Nov. 21, 2013. The JCAD was used to verify the absence of chemical contaminates during the ATSO. (U.S. Air Force photo/Senior Airman Joseph A. Pagán Jr.)
Details Download

Airmen participate in ATSO scenario

Airmen walk through a contamination control area during an Ability to Survive and Operate scenario on Barksdale Air Force Base, La., Nov. 21, 2013. The CCA was used to accomplish technical decontamination during the ATSO. (U.S. Air Force photo/Senior Airman Joseph A. Pagán Jr.)
Details Download

Airmen participate in ATSO scenario

A simulated unexploded ordnance rests on the ground during an exercise on Barksdale Air Force Base, La., Nov. 21, 2013. The UXO was used during an Ability to Survive and Operate scenario to help train Airmen who are involved with a Post Attack Reconnaissance team on how to properly cordon and identify the UXO. (U.S. Air Force photo/Senior Airman Joseph A. Pagán Jr.)
Details Download

Airmen participate in ATSO scenario

Tech. Sgt. Shawn Jamison, 2nd Civil Engineer Squadron Emergency Management, provides instruction during an Ability to Survive and Operate scenario on Barksdale Air Force Base, La., Nov. 21, 2013. During this aspect of the ATSO, Airmen learned about command and control processes, casualty reporting, decontamination and contamination avoidance. (U.S. Air Force photo/Senior Airman Joseph A. Pagán Jr.)
Details Download

Airmen participate in ATSO scenario

Senior Airman Sean Martin, 2nd Bomb Wing Public Affairs, lies on the ground during at Ability to Survive and Operate scenario on Barksdale Air Force Base, La., Nov. 21, 2013. Martin laid on the ground to simulate being a chemical casualty to see how well other Airmen responded to the emergency during the ATSO scenario. (U.S. Air Force photo/Senior Airman Joseph A. Pagán Jr.)
Details Download

Airmen participate in ATSO scenario

Post Attack Reconnaissance team members use an Airman's Manual during an Ability to Survive and Operate scenario on Barksdale Air Force Base, La., Nov. 21, 2013. The PAR members marked and reported an unexploded ordnance during the ATSO to determine the parameters required for a cordon around it. (U.S. Air Force photo/Senior Airman Joseph A. Pagán Jr.)
Details Download

Fuels Airmen inspect, maintain fuel cleanliness

Senior Airman Christian Ramirez, 2nd Logistics Readiness Squadron fuels laboratory technician, pours fuel into a microanalysis filter holder assembly on Barksdale Air Force Base, La., Nov. 5, 2013. Ramirez is sampling fuel from a pipeline that enters the base from underground. The process is used to check how much particles are in a gallon of fuel. (U.S. Air Force photo/Senior Airman Joseph A. Pagán Jr.)
Details Download

Fuels Airmen inspect, maintain fuel cleanliness

Senior Airman Christian Ramirez, 2nd Logistics Readiness Squadron fuels laboratory technician, pours fuel into a microanalysis filter holder assembly on Barksdale Air Force Base, La., Nov. 5, 2013. The assembly creates a vacuum seal in the flask pulling the fuel through a membrane filter leaving behind particles for analysis. (U.S. Air Force photo/Senior Airman Joseph A. Pagán Jr.)
Details Download

Fuels Airmen inspect, maintain fuel cleanliness

Senior Airman Christian Ramirez, 2nd Logistics Readiness Squadron fuels laboratory technician, uses a digital conductivity meter on Barksdale Air Force Base, La., Nov. 5, 2013. The meter is used to measure the static dissipating additive which is added to the fuel to assist in the dissipation of electrical charges generated through pumping and filtering activities. (U.S. Air Force photo/Senior Airman Joseph A. Pagán Jr.)
Details Download