Barksdale Air Force Base

Sort By

Category

Show Advanced Options

Clear Filters |

Storing and issuing parts needed for mission success

Airman 1st Class Fredricus Cole, 2nd Logistics Readiness Squadron storage and issue, looks for a part on Barksdale Air Force Base, La., May 15, 2013. The 2nd LRS storage and issue section issues equipment out to base organizations and ensures it gets to the right place at the right time. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Details Download

Sheet metal Airmen fix, replace B-52 parts

Staff Sgt. Cameron Elvin, 2nd Maintenance Squadron Fabrication Flight sheet metal, drills a rivet into a piece of equipment as Airman 1st Class John Nellist, 2nd MXS Fab Flight sheet metal, holds it in place on Barksdale Air Force Base, La., May 14, 2013. Airmen from the fabrication flight repair or replace sheet metal and fix loose rivets and cracks on the B-52H Stratofortress. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Details Download

Sheet metal Airmen fix, replace B-52 parts

Staff Sgt. Cameron Elvin, 2nd Maintenance Squadron Fabrication Flight sheet metal, trims the length of a rivet on Barksdale Air Force Base, La., May 14, 2013. Elvin trimmed the rivets to ensure they would properly fit inside a piece of equipment. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Details Download

Sheet metal Airmen fix, replace B-52 parts

Airman 1st Class John Nellist, 2nd Maintenance Squadron Fabrication Flight sheet metal, rounds off the edges to a door hinge on Barksdale Air Force Base, La., May 14, 2013. Sheet metal Airmen create metal parts for aircraft and other equipment when parts need to be replaced. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Details Download

Sheet metal Airmen fix, replace B-52 parts

Staff Sgt. Cameron Hayden, 2nd Maintenance Squadron Fabrication Flight sheet metal, rounds off the edges to a piece of sheet metal on Barksdale Air Force Base, La., May 14, 2013. Sheet metal Airmen create metal parts for aircraft and other equipment when parts need to be replaced. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Details Download

Sheet metal Airmen fix, replace B-52 parts

Staff Sgt. Cameron Elvin, 2nd Maintenance Squadron Fabrication Flight sheet metal, looks for a tool on Barksdale Air Force Base, La., May 14, 2013. Airmen from the fabrication flight repair or replace sheet metal and fix loose rivets and cracks on the B-52H Stratofortress. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Details Download

Sheet metal Airmen fix, replace B-52 parts

Staff Sgt. Cameron Elvin and Senior Airman Hayden Johnson, 2nd Maintenance Squadron Fabrication Flight sheet metal, create metal parts on Barksdale Air Force Base, La., May 14, 2013. Airmen from the fabrication flight repair or replace sheet metal and fix loose rivets and cracks on the B-52H Stratofortress. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Details Download

Sheet metal Airmen fix, replace B-52 parts

Airman 1st Class John Nellist, 2nd Maintenance Squadron Fabrication Flight sheet metal, creates a door hinge on Barksdale Air Force Base, La., May 14, 2013. Sheet metal Airmen create metal parts for aircraft and other equipment when parts need to be replaced. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Details Download

Phase Inspection

Senior Airman Kristin Saenz and Airman 1st Class Kristen McConnell, 2nd Maintenance Squadron Accessories flight electrical and environmental section, conduct a missile leak check on a B-52H Stratofortress on Barksdale Air Force Base, La., April 26, 2013. The check makes sure the weapon systems of the aircraft work properly and that any fittings are properly sealed. (U.S. Air Force photo/Airman 1st Class Andrew Moua)

Details Download

Phase Inspection

Airman 1st Class Kyle Gallegos, 2nd Maintenance Squadron crew chief, installs a fire wall panel on the engines of a B-52H Stratofortress during a phase inspection on Barksdale Air Force Base, La., April 26, 2013. The panel protects the bleed air and electrical systems case of engine fire or hostile actions. (U.S. Air Force photo/Airman 1st Class Andrew Moua)

Details Download

Phase Inspection

Senior Airman Christopher Gambardella, 2nd Maintenance Squadron crew chief, and Airman 1st Class Ryan Fetterer, 2 MXS Crew Chief, install a bomb bay door on a B-52H Stratofortress during a phase inspection on Barksdale Air Force Base, La., April 26, 2013. Aircraft come in for phase inspections every 450 flight hours. The inspections also include repairs to the aircraft's systems, such as the engines, electrical and life support systems, and hydraulics. (U.S. Air Force photo/Airman 1st Class Andrew Moua)

Details Download

If the seal if broken, you'll be choking

Staff Sgt. Shawn Gallagher, 2nd Aerospace Medical Squadron, reads information off a photocount plus machine during a gas mask fit test on Barksdale Air Force Base, La., May 9, 2013. During the test, a photocount plus machine measures the particle readings from the air in the room and compares it to the air found in the gas masks to ensure the masks are sealed properly. Gas mask fit tests, which are held every Thursday from 8 to 11 a.m. at Bio-Environmental Engineering, ensure Barksdale Airmen have the correct gas mask size to protect them from chemical and biological warfare agents. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Details Download

If the seal if broken, you'll be choking

Barksdale Airmen perform a breathing exercise during a gas mask fit test on Barksdale Air Force Base, La., May 9, 2013. Barksdale personnel perform a number of breathing exercises to ensure they have the correct gas mask size and that there is no break in the seal. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Details Download

If the seal if broken, you'll be choking

Staff Sgt. Bryan Farley, 96th Aircraft Maintenance Unit Electrical and Environmental Shop, performs a breathing exercise during a gas mask fit test on Barksdale Air Force Base, La., May 9, 2013. Barksdale personnel perform a number of breathing exercises to ensure they have the correct gas mask size and that there is no break in the seal. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Details Download

If the seal if broken, you'll be choking

Staff Sgt. Shawn Gallagher, 2nd Aerospace Medical Squadron, annotates the readings off a photocount plus machine on Barksdale Air Force Base, La., May 9, 2013. During a gas mask fit test, a photocount plus machine measures the particle readings from the air in the room and compares it to the air found in the gas masks to ensure the masks are sealed properly. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Details Download

If the seal if broken, you'll be choking

Staff Sgt. Shawn Gallagher, 2nd Aerospace Medical Squadron, connects an M-50 Joint Service General Purpose Mask to a photocount plus machine on Barksdale Air Force Base, La., May 9, 2013. During the test, a photocount plus machine measures the particle readings from the air in the room and compares it to the air found in the gas masks to ensure the masks are sealed properly. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Details Download

If the seal if broken, you'll be choking

Senior Airman Alexander Phillips, 2nd Maintenance Squadron, dons an M-50 Joint Service General Purpose Mask on Barksdale Air Force Base, La., May 9, 2013. Gas mask fit tests, which are held every Thursday from 8 to 11 a.m. at Bio-Environmental Engineering, ensure Barksdale Airmen have the correct gas mask size to protect them from chemical and biological warfare agents. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Details Download

You need it, they move it

Vehicle Operators from the 2nd Logistics Readiness Squadron tie-up cargo to a tractor trailer on Barksdale Air Force Base, La., May 7, 2013. Vehicle operators must ensure cargo is properly secured to the vehicle before transporting it to its destination. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Details Download

You need it, they move it

Senior Airman Jeff Dean, 2nd Logistics Readiness Squadron vehicle operator, throws a tow strap over a crate on Barksdale Air Force Base, La., May 7, 2013. Vehicle operators must ensure cargo is properly secured to the vehicle before transporting it to its destination. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Details Download

You need it, they move it

Airman 1st Class James Ott, 2nd Logistics Readiness Squadron vehicle operator, directs Senior Airman John Aultman, 2nd LRS vehicle operator, where to position his forklift on Barksdale Air Force Base, La., May 7, 2013. Vehicle operators transport aircrew members, aircraft parts, distinguished visitors and groups of people touring base. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Details Download