Senior Airman Dillon Dunbar, 2nd Maintenance Squadron Fabrication Flight sheet metal, drills rivets out of a lower body cowling on Barksdale Air Force Base, La., Jan. 29. Airmen from the fabrication flight repair or replace sheet metal and fix loose rivets and cracks on the B-52H Stratofortress. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)
Staff Sgt. Patrick Towler, 2nd Maintenance Squadron Fabrication Flight sheet metal, inspects a lower body cowling for damage on Barksdale Air Force Base, La., Jan. 29. The lower body cowling is placed under the engine of a B-52H Stratofortress and is used to protect it from debris. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)
Airman Dylan Fox, 2nd Maintenance Squadron Fabrication Flight sheet metal, measures the thickness of a sheet of raw metal on Barksdale Air Force Base, La., Jan. 29. The fabrication flight makes metal parts for aircraft and repair aerospace ground equipment. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)
Airman 1st Class Shelby Bates and Staff Sgt. Patrick Towler, 2nd Maintenance Squadron Fabrication Flight sheet metal, turns over a lower body cowling for repairs on Barksdale Air Force Base, La., Jan. 29. The lower body cowling is placed under the engine of a B-52H Stratofortress and is used to protect it from debris. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)
Airmen from the 2nd Maintenance Squadron Fabrication Flight move a B-52H Stratofortress engine on Barksdale Air Force Base, La., Jan. 29. The fabrication flight makes metal parts for aircraft and repair aerospace ground equipment. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)
Airmen 1st Class Michael Lane and Nicholas Singleton, 2nd Maintenance Squadron Fabrication Flight metals technology, check engine mounts on Barksdale Air Force Base, La., Jan. 29. Lane and Singleton checked the diameters of the engine mounts to ensure they are correct and within tolerance. If the parts malfunction, the engine will be held improperly. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)
Senior Airman Dillon Dunbar, 2nd Maintenance Squadron Fabrication Flight sheet metal, drills rivets out of a lower body cowling on Barksdale Air Force Base, La., Jan. 29. Airmen from the fabrication flight repair or replace sheet metal and fix loose rivets and cracks on the B-52 aircraft. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)
Airman Dylan Fox, 2nd Maintenance Squadron Fabrication Flight sheet metal, uses a grinder to cut sheet metal on Barksdale Air Force Base, La., Jan. 29. The fabrication flight makes metal parts for aircraft and repair aerospace ground equipment. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)