Airman 1st Class John Nellist, 2nd Maintenance Squadron Fabrication Flight sheet metal, creates a door hinge on Barksdale Air Force Base, La., May 14, 2013. Sheet metal Airmen create metal parts for aircraft and other equipment when parts need to be replaced. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)
Staff Sgt. Cameron Elvin and Senior Airman Hayden Johnson, 2nd Maintenance Squadron Fabrication Flight sheet metal, create metal parts on Barksdale Air Force Base, La., May 14, 2013. Airmen from the fabrication flight repair or replace sheet metal and fix loose rivets and cracks on the B-52H Stratofortress. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)
Staff Sgt. Cameron Elvin, 2nd Maintenance Squadron Fabrication Flight sheet metal, looks for a tool on Barksdale Air Force Base, La., May 14, 2013. Airmen from the fabrication flight repair or replace sheet metal and fix loose rivets and cracks on the B-52H Stratofortress. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)
Staff Sgt. Cameron Hayden, 2nd Maintenance Squadron Fabrication Flight sheet metal, rounds off the edges to a piece of sheet metal on Barksdale Air Force Base, La., May 14, 2013. Sheet metal Airmen create metal parts for aircraft and other equipment when parts need to be replaced. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)
Airman 1st Class John Nellist, 2nd Maintenance Squadron Fabrication Flight sheet metal, rounds off the edges to a door hinge on Barksdale Air Force Base, La., May 14, 2013. Sheet metal Airmen create metal parts for aircraft and other equipment when parts need to be replaced. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)
Staff Sgt. Cameron Elvin, 2nd Maintenance Squadron Fabrication Flight sheet metal, trims the length of a rivet on Barksdale Air Force Base, La., May 14, 2013. Elvin trimmed the rivets to ensure they would properly fit inside a piece of equipment. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)
Staff Sgt. Cameron Elvin, 2nd Maintenance Squadron Fabrication Flight sheet metal, drills a rivet into a piece of equipment as Airman 1st Class John Nellist, 2nd MXS Fab Flight sheet metal, holds it in place on Barksdale Air Force Base, La., May 14, 2013. Airmen from the fabrication flight repair or replace sheet metal and fix loose rivets and cracks on the B-52H Stratofortress. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)