HomeNews

2 MXS Fab Flight provide preventative maintenance for the BUFF

Airman 1st Class Wesley Harvin, 2nd Maintenance Squadron Fabrication Flight paint shop, prepares his tools before painting aircraft parts on Barksdale Air Force Base, La., May 15, 2013. The shop provides preventative maintenance for 2nd MXS by using a corrosion resistant paint on aircraft parts in order to prevent corrosion damage. (U.S. Air Force photo/Airman 1st Class Andrew Moua)

Airman 1st Class Wesley Harvin, 2nd Maintenance Squadron Fabrication Flight paint shop, prepares his tools before painting aircraft parts on Barksdale Air Force Base, La., May 15, 2013. The shop provides preventative maintenance for 2nd MXS by using a corrosion resistant paint on aircraft parts in order to prevent corrosion damage. (U.S. Air Force photo/Airman 1st Class Andrew Moua)

Airman 1st Class Wesley Harvin, 2nd Maintenance Squadron Fabrication Flight paint shop, dons a respirator before painting aircraft parts on Barksdale Air Force Base, La., May 15, 2013. The shop provides preventative maintenance for 2nd MXS by using a corrosion resistant paint on aircraft parts in order to prevent corrosion damage. (U.S. Air Force photo/Airman 1st Class Andrew Moua)

Airman 1st Class Wesley Harvin, 2nd Maintenance Squadron Fabrication Flight paint shop, dons a respirator before painting aircraft parts on Barksdale Air Force Base, La., May 15, 2013. The shop provides preventative maintenance for 2nd MXS by using a corrosion resistant paint on aircraft parts in order to prevent corrosion damage. (U.S. Air Force photo/Airman 1st Class Andrew Moua)

Airman 1st Class Wesley Harvin, 2nd Maintenance Squadron Fabrication Flight paint shop, looks over a technical order prior to painting aircraft parts on Barksdale Air Force Base, La., May 15, 2013. TOs are step-by-step instruction manuals used by maintenance Airmen that list proper tools needed, any hazards to be aware of and protective gear to accomplish the task. (U.S. Air Force photo/Airman 1st Class Andrew Moua)

Airman 1st Class Wesley Harvin, 2nd Maintenance Squadron Fabrication Flight paint shop, looks over a technical order prior to painting aircraft parts on Barksdale Air Force Base, La., May 15, 2013. TOs are step-by-step instruction manuals used by maintenance Airmen that list proper tools needed, any hazards to be aware of and protective gear to accomplish the task. (U.S. Air Force photo/Airman 1st Class Andrew Moua)

Airman 1st Class Wesley Harvin, 2nd Maintenance Squadron Fabrication Flight paint shop, mixes paint on Barksdale Air Force Base, La., May 15, 2013. Before painting aircraft parts, the paint is mixed together with a catalyst which serves as a curing agent. (U.S. Air Force photo/Airman 1st Class Andrew Moua)

Airman 1st Class Wesley Harvin, 2nd Maintenance Squadron Fabrication Flight paint shop, mixes paint on Barksdale Air Force Base, La., May 15, 2013. Before painting aircraft parts, the paint is mixed together with a catalyst which serves as a curing agent. (U.S. Air Force photo/Airman 1st Class Andrew Moua)

Airman 1st Class Wesley Harvin, 2nd Maintenance Squadron Fabrication Flight Paint Shop, checks his spray pattern before painting aircraft parts on Barksdale Air Force Base, La., May 15, 2013. Before painting, paint shop Airmen check their spray pattern to ensure the paint gun is properly pressurized, pressure which is too high or low can cause an uneven coat to be applied. (U.S. Air Force photo/Airman 1st Class Andrew Moua)

Airman 1st Class Wesley Harvin, 2nd Maintenance Squadron Fabrication Flight Paint Shop, checks his spray pattern before painting aircraft parts on Barksdale Air Force Base, La., May 15, 2013. Before painting, paint shop Airmen check their spray pattern to ensure the paint gun is properly pressurized, pressure which is too high or low can cause an uneven coat to be applied. (U.S. Air Force photo/Airman 1st Class Andrew Moua)

Airman 1st Class Wesley Harvin, 2nd Maintenance Squadron Fabrication Flight paint shop, paints B-52H Stratofortress components on Barksdale Air Force Base, La., May 15, 2013. The shop provides preventative maintenance for 2nd MXS by using a corrosion resistant paint on aircraft parts in order to prevent corrosion damage. (U.S. Air Force photo/Airman 1st Class Andrew Moua)

Airman 1st Class Wesley Harvin, 2nd Maintenance Squadron Fabrication Flight paint shop, paints B-52H Stratofortress components on Barksdale Air Force Base, La., May 15, 2013. The shop provides preventative maintenance for 2nd MXS by using a corrosion resistant paint on aircraft parts in order to prevent corrosion damage. (U.S. Air Force photo/Airman 1st Class Andrew Moua)

Airman 1st Class Wesley Harvin, 2nd Maintenance Squadron Fabrication Flight paint shop, paints B-52H Stratofortress components on Barksdale Air Force Base, La., May 15, 2013. The shop provides preventative maintenance for 2nd MXS by using a corrosion resistant paint on aircraft parts in order to prevent corrosion damage. (U.S. Air Force photo/Airman 1st Class Andrew Moua)

Airman 1st Class Wesley Harvin, 2nd Maintenance Squadron Fabrication Flight paint shop, paints B-52H Stratofortress components on Barksdale Air Force Base, La., May 15, 2013. The shop provides preventative maintenance for 2nd MXS by using a corrosion resistant paint on aircraft parts in order to prevent corrosion damage. (U.S. Air Force photo/Airman 1st Class Andrew Moua)

Contact us

To reach the Barksdale Air Force Base Main Directory, call: (318) 456-1110

To request Public Affairs support, please fill out an Form 833 and email to the organizational mailbox

News Search