Storing and issuing parts needed for mission success

Airman 1st Class Fredricus Cole, 2nd Logistics Readiness Squadron storage and issue, puts a box in storage while operating a hyster on Barksdale Air Force Base, La., May 15, 2013. Airmen from the 2nd LRS storage and issue section uses a variety of equipment including forklifts, hysters and ladders to access the parts base personnel need. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Storing and issuing parts needed for mission success

Airman 1st Class Fredricus Cole, 2nd Logistics Readiness Squadron storage and issue, organizes equipment on Barksdale Air Force Base, La., May 15, 2013. The 2nd LRS storage and issue section issues equipment out to base organizations and ensures it gets to the right place at the right time. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Storing and issuing parts needed for mission success

Airman 1st Class Fredricus Cole, 2nd Logistics Readiness Squadron storage and issue, looks for a part on Barksdale Air Force Base, La., May 15, 2013. The 2nd LRS storage and issue section issues equipment out to base organizations and ensures it gets to the right place at the right time. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Sheet metal Airmen fix, replace B-52 parts

Staff Sgt. Cameron Elvin, 2nd Maintenance Squadron Fabrication Flight sheet metal, drills a rivet into a piece of equipment as Airman 1st Class John Nellist, 2nd MXS Fab Flight sheet metal, holds it in place on Barksdale Air Force Base, La., May 14, 2013. Airmen from the fabrication flight repair or replace sheet metal and fix loose rivets and cracks on the B-52H Stratofortress. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Sheet metal Airmen fix, replace B-52 parts

Staff Sgt. Cameron Hayden, 2nd Maintenance Squadron Fabrication Flight sheet metal, rounds off the edges to a piece of sheet metal on Barksdale Air Force Base, La., May 14, 2013. Sheet metal Airmen create metal parts for aircraft and other equipment when parts need to be replaced. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)

Sheet metal Airmen fix, replace B-52 parts

Staff Sgt. Cameron Elvin, 2nd Maintenance Squadron Fabrication Flight sheet metal, looks for a tool on Barksdale Air Force Base, La., May 14, 2013. Airmen from the fabrication flight repair or replace sheet metal and fix loose rivets and cracks on the B-52H Stratofortress. (U.S. Air Force photo/Airman 1st Class Benjamin Gonsier)