Barksdale Air Force Base   Right Corner Banner
Join the Air Force

Photos > Media Gallery
Selected : People : On the Job

12 Result(s) Found

Show 12 24 48
 
2nd MXS Airmen inspect and repair B-522nd MXS Airmen inspect and repair B-52
2nd MXS Airmen inspect and repair B-52

Tech. Sgt. Theodore Kolffvanoosterwk, left, and Senior Airman Richard Lester, 2nd Maintenance Squadron aircraft hydraulics technicians, conduct a quality assurance inspection on a B-52H Stratofortress on Barksdale Air Force Base, La., March 31, 2014. After the initial inspection, a second inspection is completed and tasks are assigned for repairs. (U.S. Air Force photo/Senior Airman Kristin High)
2nd MXS Airmen ...


Download Full Image
E-mail a friend
Posted: 4/2/2014

2nd MXS Airmen inspect and repair B-522nd MXS Airmen inspect and repair B-52
2nd MXS Airmen inspect and repair B-52

Tech Sgt. Keith Wolsey, 2nd Maintenance Squadron aircraft recovery technician, rigs throttle cables on a B-52H Stratofortress on Barksdale Air Force Base, La., March 31, 2014. The throttle cables help control fuel output during flight and are replaced as needed from wear and tear during the flight. (U.S. Air Force photo/Senior Airman Kristin High)
2nd MXS Airmen ...


Download Full Image
E-mail a friend
Posted: 4/2/2014

Let the sparks fly: 2nd MXS welder certificationLet the sparks fly: 2nd MXS welder certification
Let the sparks fly: 2nd MXS welder certification

Senior Airman Leonard Avalos, 2nd Maintenance Squadron non-destructive inspection journeyman, checks the exposure on an X-ray film on Barksdale Air Force Base, La., March. 25, 2014. These X-ray films are used to check for cracks in welds by 2nd MXS metals technology Airmen completing their welding certification. (U.S. Air Force photo/Staff Sgt. Jason McCasland)
Let the sparks ...


Download Full Image
E-mail a friend
Posted: 3/27/2014

Let the sparks fly: 2nd MXS welder certificationLet the sparks fly: 2nd MXS welder certification
Let the sparks fly: 2nd MXS welder certification

Airmen from the 2nd Maintenance Squadron non-destructive inspection shop wait for an X-ray to finish on Barksdale Air Force Base, La., March. 25, 2014. NDI uses an X-ray machine to look at welds for certification. (U.S. Air Force photo/Staff Sgt. Jason McCasland)
Let the sparks ...


Download Full Image
E-mail a friend
Posted: 3/27/2014

Let the sparks fly: 2nd MXS welder certificationLet the sparks fly: 2nd MXS welder certification
Let the sparks fly: 2nd MXS welder certification

Staff Sgt. Josh Martinez, 2nd Maintenance Squadron, non-destructive inspection NCO in-charge, tapes an identification tag onto an aluminum tube being tested for cracks on Barksdale Air Force Base, La., March. 25, 2014. NDI Airmen inspect for cracks within the weld, proper penetration into the weld and porosity, which is gas formations that did not escape prior to the weld. (U.S. Air Force photo/Staff Sgt. Jason McCasland)
Let the sparks ...


Download Full Image
E-mail a friend
Posted: 3/27/2014

Let the sparks fly: 2nd MXS welder certificationLet the sparks fly: 2nd MXS welder certification
Let the sparks fly: 2nd MXS welder certification

Senior Airman Tony Guinn, 2nd Maintenance Squadron aircraft metals technology journeyman, tungsten inert gas, or TIG, welds an aluminum tube mounted on a 45 degree fixture on Barksdale Air Force Base, La., March. 25, 2014. These tubes are part of a five-year welder’s certification. The certification requires a steady hand to ensure proper weld penetration through the walls of the aluminum. (U.S. Air Force photo/Staff Sgt. Jason McCasland)
Let the sparks ...


Download Full Image
E-mail a friend
Posted: 3/27/2014

Let the sparks fly: 2nd MXS welder certificationLet the sparks fly: 2nd MXS welder certification
Let the sparks fly: 2nd MXS welder certification

Senior Airman Tony Guinn, 2nd Maintenance Squadron aircraft metals technology journeyman, welds two aluminum tubes as part of his five-year certification on Barksdale Air Force Base, La., March. 25, 2014. The certification requires two pieces of aluminum to be mounted on a fixture at 45 degrees and welded. (U.S. Air Force photo/Staff Sgt. Jason McCasland)
Let the sparks ...


Download Full Image
E-mail a friend
Posted: 3/27/2014

Let the sparks fly: 2nd MXS welder certificationLet the sparks fly: 2nd MXS welder certification
Let the sparks fly: 2nd MXS welder certification

Senior Airman Tony Guinn, 2nd Maintenance Squadron aircraft metals technology journeyman, grinds a tungsten inert gas, or TIG, welder tip prior to his welding certification on Barksdale Air Force Base, La., March. 25, 2014. The certification requires two pieces of aluminum to be mounted on a fixture at 45 degrees and cannot be repositioned once mounted. (U.S. Air Force photo/Staff Sgt. Jason McCasland)
Let the sparks ...


Download Full Image
E-mail a friend
Posted: 3/27/2014

Let the sparks fly: 2nd MXS welder certificationLet the sparks fly: 2nd MXS welder certification
Let the sparks fly: 2nd MXS welder certification

Senior Airman Tony Guinn, 2nd Maintenance Squadron aircraft metals technology journeyman, uses a lathe to de-burr a pipe prior to welding on Barksdale Air Force Base, La., March.25, 2014. Prior to becoming a certified welder, each Airmen must clean their parts to be welded to ensure proper weld fusion. (U.S. Air Force photo/Staff Sgt. Jason McCasland)
Let the sparks ...


Download Full Image
E-mail a friend
Posted: 3/27/2014

Electrical Airmen power B-52Electrical Airmen power B-52
Electrical Airmen power B-52

Senior Airman Johnathan Martin and Airman 1st Class Kristen Tanner, 2nd Maintenance Squadron Electrical and Environmental systems journeymen, review a technical order prior to a final inspection on a liquid oxygen tank, or LOX tank, on Barksdale Air Force Base, La., March 24, 2014. After the repair, the LOX tank may be used to provide breathable air on a B-52H Stratofortress that same day. (U.S. Air Force photo/Airman 1st Class Benjamin Raughton)
Electrical ...


Download Full Image
E-mail a friend
Posted: 3/27/2014

Electrical Airmen power B-52Electrical Airmen power B-52
Electrical Airmen power B-52

Liquid oxygen tanks sit on the flightline on Barksdale Air Force Base, La., March 24, 2014. Liquid oxygen tanks provide pilots and aircrew clean, breathable air on the B-52H Stratofortress. (U.S. Air Force photo/Airman 1st Class Benjamin Raughton)
Electrical ...


Download Full Image
E-mail a friend
Posted: 3/27/2014

Electrical Airmen power B-52Electrical Airmen power B-52
Electrical Airmen power B-52

Senior Airman Corey Richer, 707th MXS Electric and Environmental systems journeyman, and Senior Airman Johnathan Martin and Airman 1st Class Kristen Tanner, 2nd Maintenance Squadron E and E systems journeymen, review a sheet detailing issues with the liquid oxygen tanks on Barksdale Air Force Base, March 24, 2014. The tanks need regular maintenance in order to provide B-52H Stratofortress pilots with clean, breathable air. (U.S. Air Force photo/Airman 1st Class Benjamin Raughton)
Electrical ...


Download Full Image
E-mail a friend
Posted: 3/27/2014

    

 Inside Barksdale AFB

ima cornerSearch

ima cornerCategories
All Photos
   Air Show 2014
   Air Show 2015
   Aircraft
   Awards
   Mission
   Official Photos
   People
      Off Duty
      On the Job
   Special Interest

Site Map      Contact Us     Questions     USA.gov     Security and Privacy notice     E-publishing  
Suicide Prevention    SAPR   IG   EEO   Accessibility/Section 508   No FEAR Act